Magpul PMAG 5/10 LR/SR 7.62X51 / 308Win Gen3 M3
The 7.62×51 NATO (.308 Winchester) PMAG 10 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles featuring true 5-round capacity, constant-curve body, anti-tilt follower, and snap on Impact/Dust Cover. Designed specifically for SAAMI-spec ammunition, the PMAG 10LR/SR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself. Made in
Calson’s Dummy Shotgun Snap Caps, 12Ga – 2Rds
These weighted 12ga shotgun snap caps (dummy rounds) have the same feel and weight as a live round which makes them perfect for practicing reloads for competitive shooting events, like 3-Gun. A spring loaded striking area cushions and protects the release of the firing pin which makes these an excellent tool for teaching and eliminating flinching as well. Prevents damage and prolongs main spring life. Precision machined to true SAAMI
Calson’s Brass/Wool Shotgun Snap Caps, 12Ga – 2Rds
These Brass Wool snap caps have a spring loaded primer plunger which prevents firing pin damage during dry-firing exercises. Treat the wool chamber mop with your favorite gun oil to prevent rusty chambers during storage. NOTE: leaving guns cocked during storage is hard on springs and is dangerous. These will help keep your shotgun in good condition.
Calson’s Aluminum/Wool Shotgun Snap Caps, 12Ga – 2Rds
These Aluminum snap caps have a spring-loaded primer plunger which prevents firing pin damage during dry-firing exercises. Treat the wool chamber mop with you favorite gun oil to prevent rusty chambers during storage. NOTE: Leaving guns cocked during storage is hard on springs and is dangerous. These will help keep your firearm in good condition.
Calson’s Aluminum Shotgun Snap Caps, 12Ga – 2Rds
These NEW snap caps are made from high strength aluminum for repeat use. Spring-loaded primer plunger prevents firing pin damage during dry-firing exercises. NOTE: leaving guns cocked during storage is hard on springss and is dangerous. These will help keep your firearm in good condition. Prevents damage and prolongs main spring life. Precision machined to true SAAMI specs. Primer material is correct hardness to prevent striker/firing pin over-protrusion. Aluminum won’t
Calson’s Aluminum Snap Caps, 9mm – 5Rds
Calson’s Snap Caps allow for safe release of firing pin springs. A spring loaded striking area cushions and protects firing pins. An excellent tool for teaching and eliminating flinching. Two Snap Caps are included in each package. Available for a variety of calibers. Prevents damage and prolongs main spring life. Precision machined to true SAAMI specs. Primer material is correct hardness to prevent striker/firing pin over-protrusion. Aluminum won’t damage the
Calson’s Aluminum Snap Caps, 22 LR – 6Rds
Calson’s Snap Caps allow for safe release of firing pin springs. A spring loaded striking area cushions and protects firing pins. An excellent tool for teaching and eliminating flinching. Two Snap Caps are included in each package. Available for a variety of calibers. Prevents damage and prolongs main spring life. Precision machined to true SAAMI specs. Primer material is correct hardness to prevent striker/firing pin over-protrusion. Aluminum won’t damage the
Blackhawk Sportster 52″ Shotgun Soft Case, Blk
Blackhawk Sportster 52″ Shotgun Soft Case, Blk
Lyman Brass-Smith All-American 8 Turret Press
IMPORTANT: Over-weight items, please contact us for shipping quotation. It is strongly recommended to pick up in store. The eight station Brass Smith All-American 8 Press is the most feature-packed, rugged turret press on the market! Starting at the top, the extra-large 8 station turret is machined out of heavy duty cast iron. It is equipped with an easily removed turret bolt which makes swapping turrets simple. The 8 die station
Hornady Custom Grade 300 PRC 2-Die Set
• Hand-inspected for consistency • Elliptical expander reduces friction • Sliding in-line seating for perfect centering • Hand-polished mirror finish These dies sport a slippage-eliminating Zip-Spindle™ design for a perfectly aligned fit and easy spindle-lock tightening. A sliding alignment sleeve holds the bullet, case neck and seating stem before loading for straight bullet seating. Polished elliptical expander smoothly releases from case necks and eliminates the need for a separate expander
RCBS 44 Mag/44 Spl 3-Die Carbide Taper Crimp Set
RCBS pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet, and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and taper crimps.
RCBS 45 ACP 3-Die Carbide Taper Crimp Set
RCBS pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet, and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and taper crimps.
RCBS 357 Mag/38 Spl 3-Die Carbide Taper Crimp Set
RCBS pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet, and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and taper crimps.
RCBS 9mm 3-Die Carbide Taper Crimp Set
RCBS pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet, and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and taper crimps.
RCBS 30 Carbine 3-Die Carbide Taper Crimp Set
RCBS pioneered and developed 3-Die Sets for straight-wall rifle and pistol cases. The Carbide Sizer Die sizes the case and de-primes (the carbide sizer ring eliminates the need to lubricate). The Expander Die expands the case to the proper diameter to accept the bullet, and it imparts case mouth flare/bell for bullet feeding. The Seater Die seats the bullet and taper crimps.
RCBS 223 Rem Small Base Die Set
This two-die set is for bottleneck type cases used in tight-chambering semi-automatic, pump or lever-action rifles. It consists of a Small Base Sizer with an Expander-Decapping Unit and Regular Seater Die with Seater Plug. The sizer resizes cases below SAAMI minimums, reducing the shoulder and body by a few thousandths. It also de-primes the case. The included Seater Die has a built-in roll crimper to secure the bullet at the
RCBS 270 Win Neck Sizer Die
The Neck Sizer Die features an Expander-Decapping Unit. It resizes the case neck only (it doesn’t touch the shoulder or body) and de-primes.
RCBS 35 Rem Full Length Die Set
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for
RCBS 300 Sav Full Length Die Set
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for
RCBS 250 Sav Full Length Die Set
This two-die set is intended for reloading bottleneck cases, and consists of a Full-Length Sizer Die with an Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug. The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions. It sizes the outside of the case, de-primes and expands the neck to accept the bullet. The die has vents to prevent case damage caused by trapped air and for
